Copperhead V2 Wiring Set - Trigger, Deans, Motor Connectors. Help

[Echthelion]

So I have what the title of says, and I am puzzled at what the Blue wires are for that are on the trigger connector, and the pieces are from Clandestine Air soft. So if you can give me some info, it would be appreciated. 

[T6e9a]

Pictures would be a big help. But if it is a MOSFET wiring setup, the FET should be on the negative wire, with the gate wire routed to one side of the trigger contacts. The positive wire should go from the deans to the other side of the contacts, to the motor.

[Echthelion]

Thanks for replying so quick, and here is a pic.

[T6e9a]

The wiring set is meant to be purchased with the Copperhead MOSFET: http://www.clandestineairsoft.com/electrical-parts-c-1_27/apex-copperhead-mosfet-screw-terminal-protected-fused-p-916.html

As the MOSFET itself doesn't come with wiring. And it is sold separately as some people might already have wiring and connectors and not need all the extra bits.

[Echthelion]

That would do it, thanks for the info.