I'm wanting to sell my A&K M249 Para for
SOLD. It's been used in one rec game at Action Paintball and also Northern Lights 4, mounted on the back of the A-Team truck. It has a feeding issue that I've never been able to figure out. Sometimes it feeds fine, other times it only feeds around 50% of the time. If you wiggle the feed hose around it feeds constantly. From day 1 I tore the gearbox apart and re-shimmed, corrected AoE, fixed compression, rewired with heavy gauge super flexible wire, and added a MOSFET. I've also corrected the hopup issue that most M249's come with (adding a nub, since it didn't come with one). I routed the wiring to the boxmag which is where the 5000mAh 7.4V LiPo is mounted. I've made most of the modifications to the boxmag for more reliable feeding, so I'm assuming the feed issue is due to the hopup unit. Buying a new one may fix the issue. I expect with my modifications, the gun should be very solid for a very long time. I've put around 7500 rounds through it with no issue other than the feed problem. The boxmag has some scuffing on it from use, but no cracks. I'm also including the replica EOTech that is mounted on the gun. I don't know the brand of the EOTech, but it is fully functional. The battery shrinkwrap that is shown in the picture had to be removed in order to cram the battery into the boxmag. It's a tight fit and the two cells had to be slightly diagonal instead of perfectly aligned.
I'm also looking to sell my G&P gearbox for
SOLD, that includes the following:
Matrix Godzilla Super High Torque Performance Airsoft AEG Motor - Long
ASCU Fire Control System
SHS 13:1 Gears (obviously re-shimmed)
Corrected AoE
I barely used this setup before I converted my gun to a P*. I believe it was only in one game. Nothing is wrong with any of this, it's almost brand new.
I'm not interested in any trades, and the prices listed are assuming face to face transactions.
On to the pictures.
