Text me at 810-964-1825, text only please. Or find me on Facebook as John Jack Needham. I am not here frequently so I don't really check my messages here.
All 3 guns are essentially new, they were built inside and out then hung up on a wall. The 4CRS has had a few modifications as it was once an HPA gun with Wraith stock, but still in excellent condition. The VFC platinum and 4CRL are essentially brand new condition inside and out.
VFC / Elite Force 4CRS $300
Externals:
G&P numbered buffer tube
New outer barrel
Internals:
Maple Leaf cylinder, cylinder head, and piston head
19 TPA neo motor (VFC arm in neo can)
King Arms tappet plate
CA FMR piston
SHS 12:1 gears
Spark labs micro mosfet
Lonex hop up unit
Lonex 70° bucking
Shoots 360-365 FPS with .20g
Can include 7.4v Lipos that fit in the buffer tube and a basic lipo charger for extra if wanted. Also can wire to deans if preferred for free.
VFC / Elite Force 4CRL DMR $400
Externals:
Valken 1-4x short dot
Classic Army extended S-system rail (discontinued and rare)
20 inch barrel (inner matches)
Internals:
19 TPA neo motor
G&G tappet plate
CA FMR piston
Full cylinder
Maple Leaf double o ring cylinder head and piston head
SHS 12:1 gears
Spark Labs micro mosfet (deans)
Maple Leaf bucking
ZCI steel 6.02 x 509mm barrel
Shoots 440 fps with .20g bbs
VFC Platinum Grey Block 1.5 + LVOA upper Price varies on how much you want.
Just base gun: $400
Block 1.5 attachments: $550
Block 1.5 + LVOA: $650
Externals:
VFC platinum base
CYMA KAC style rail (stock hand guard also included)
Element Block 1 attachments package (PEQ, dual pad, M3X)
Eotech XPS QD mount
VFC KAC style flip up rear sight
G&G foregrip
2nd upper: Grey VFC platinum upper with a black LVOA rail (and outer barrel) and Tippmann MBUS style flip ups . This upper has a more used condition, but still in good shape
Internals:
Maple Leaf 80° bucking
Lonex compression set (nozzle, cylinder head, cylinder, piston head)
CA FMR piston
1.6 J spring (415 FPS with .20g)
New tappet plate (can't recall brand)
SHS 12:1 gears
Hulkfet mosfet
19 TPA motor (VFC arm in a neo can)
Contact me as listed above for more information and pictures
