1
Digital Entertainment / Re: Steam Usernames
« on: July 07, 2015, 08:41:39 PM »
Name: bloodyisrael
Games: TF2 and prop hunt via G-Mod
Games: TF2 and prop hunt via G-Mod
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Airsoft Discussion / Re: Airsoft sentry
« on: July 07, 2015, 06:12:47 PM »
Yes, I did see that system and am going to take a few things from it.
3
Airsoft Discussion / Re: Airsoft sentry
« on: July 01, 2015, 06:22:47 AM »
I had planned on making it semi auto only with a mid power aeg ~300-350. I'm still researching it so I'm sure of the full capabilities for autostopping. I might look into making it remote controlled but I think that would take away the point.
:edit:
Thinking about it more in depth, it might be best to make it remote controlled and have some sort of a fair play system. I wouldn't want a ref getting shot at or have no way of letting the opposition take it out. I saw a version on YouTube that has pressure pads that when shot will disable the system so I might want to look into that for it.
I feel I should mention I only plan on using this at outdoor recs.
:edit:
Thinking about it more in depth, it might be best to make it remote controlled and have some sort of a fair play system. I wouldn't want a ref getting shot at or have no way of letting the opposition take it out. I saw a version on YouTube that has pressure pads that when shot will disable the system so I might want to look into that for it.
I feel I should mention I only plan on using this at outdoor recs.
4
Airsoft Discussion / Airsoft sentry
« on: June 30, 2015, 02:14:52 PM »
Alright, so I found plans for a sentry gun setup. It may be impractical but would it be allowed in rec games? I really want to build one but don't want to waste the time or money if it will not be allowed. Thanks for any input.
5
Michigan Commerce - Airsoft Guns Allowed / Re: WTS/WTT Bunch of stuff. Looking for multicam!
« on: May 24, 2015, 04:34:54 PM »
I have multicam for sale. I wear 38 waist and large/xl tops
6
Michigan Commerce - Airsoft Guns Allowed / Re: WTS Marui PX4 And gear
« on: May 23, 2015, 11:13:59 PM »
Yes, it is all priced separately.
7
Michigan Commerce - Airsoft Guns Allowed / Re: WTS Marui PX4 And gear
« on: May 08, 2015, 05:42:31 PM »
Mainly clubs. Drivers, irons, or putters.
8
Michigan Commerce - Airsoft Guns Allowed / Re: WTS Marui PX4 And gear
« on: May 08, 2015, 04:52:28 PM »
Bump. Edited: Picture added and prices broke down
9
Michigan Commerce - Airsoft Guns Allowed / WTS Marui PX4 And gear
« on: April 29, 2015, 06:53:18 PM »
I am going to back away from airsoft for the time being. So here is what i have.
-Tokyo Marui px4, nineball tightbore barrel installed and original box included. Hairline crack on ejection port. I believe it will last for quite a while if green gas is used. WE metal slides are only $44 though. Right side decocker works left side only sometimes.
-3x Marui magazines. 1 has a broken but still usable feed lip.
-2x WE-tech magazines. 1 with a fully busted feed lip. The are not interchangeable from marui to we, I tried.
-1x Blackhawk serpa for the px4, one of the nuts that the screws from the mount go into is striped and will not let the screw come out. Currently the duty belt mount is attached but paddle mount will be included in case you could figure it out.
~$170
-1x condor battle belt with inner belt.
~$15
-1x black pouch which i use as a dump pouch for the pistol mags
~$5
-1x condor radio pouch atteched to the large pouch
-1x midland radio
~$20
-1x what I'm guessing is a replica mich helmet with a contor mount on the right side.
~$60
-1x tan metal mesh lower face mask
~$10
-1x valken glasses with eye sealers
~$5
-1 set of multicam, I'm a 38x30 and L
~$20
-1x barrel cover
~$5
-3x speedloaders
~$5
-3x co2 powerletts
~$1
And a zombie killer pvc patch.
~$5
Cash Bundle price will be $300 obo and will accept Computer Peripherals or golf equipment
-Tokyo Marui px4, nineball tightbore barrel installed and original box included. Hairline crack on ejection port. I believe it will last for quite a while if green gas is used. WE metal slides are only $44 though. Right side decocker works left side only sometimes.
-3x Marui magazines. 1 has a broken but still usable feed lip.
-2x WE-tech magazines. 1 with a fully busted feed lip. The are not interchangeable from marui to we, I tried.
-1x Blackhawk serpa for the px4, one of the nuts that the screws from the mount go into is striped and will not let the screw come out. Currently the duty belt mount is attached but paddle mount will be included in case you could figure it out.
~$170
-1x condor battle belt with inner belt.
~$15
-1x black pouch which i use as a dump pouch for the pistol mags
~$5
-1x condor radio pouch atteched to the large pouch
-1x midland radio
~$20
-1x what I'm guessing is a replica mich helmet with a contor mount on the right side.
~$60
-1x tan metal mesh lower face mask
~$10
-1x valken glasses with eye sealers
~$5
-1 set of multicam, I'm a 38x30 and L
~$20
-1x barrel cover
~$5
-3x speedloaders
~$5
-3x co2 powerletts
~$1
And a zombie killer pvc patch.
~$5
Cash Bundle price will be $300 obo and will accept Computer Peripherals or golf equipment
Pages: [1]